Data Sheet

DESCRIPTION
The PESC-F100 connects between the thermostat/controller and the controlled device, usually a damper actuator or any heating/cooling valve.  A wireless receiver with internal outputs is configured to control the pneumatic switching valves by providing on, off, and auto control.  Powered by energy harvesting, which means no battery to replace. Hardwired supply air sensor and tube connected CFM inputs. Input values are transmitted wirelessly to the remote communications hub.

APPLICATION
Typical installation for the PESC- F100 would be to mount the device in the ceiling next to the VAV Box.  Wall mounted room temperature sensors transmit wireless temperature information to the remote communications controller.
The remote communications controller provides the capabilities to monitor room temperature, supply air temperature, and CFM. Additional monitoring options are available.

MODES OF CONTROL
-Auto: Provides a direct unaffected control from the existing pneumatic thermostat.
-Off:   Shuts off the heating and/or cooling to the controlled device.
-On:   Overrides the thermostat and provides full heating and/or cooling to the controlled device.

FEATURES
Individual schedules for each PESC- F100.  Unoccupied/occupied/holiday settings with pushbutton or computer generated time to override for after hour occupancy. 

Setpoint limitations which prevent the pneumatic thermostat from extreme setpoint conditions.  Motion and/or light detection setpoint limitations.

Override data logging for tenant billing opportunities.  Alarms from multiple input opportunities.

Fail safe places the PESC- F100 to the auto position allowing the thermostat control as normal.

Enables Demand Response strategies.